Pump To Surface

The Scope Pump to Surface - or PTS - process utilizes the production flush joint to aid in pumping oil and/or sand down the flowline. Using a simple set up, the polish rod is mechanically attached to the flush joint, which strokes the tubing during the pumping process.

A simple conversion to a PTS system with the existing Scope Flush Joint uses the existing flowline to transfer fluid to tanks. All anchors and/or packers can be set through the flush joint with a B.O.P. installed on a well. Coil access is at ground level, to address safety concerns.

The Scope PTS assembly allows for the use of retrievable ball valves or coil through valves. Side entry wellheads have even greater time savings using this process. Durable cups on the mandrel ensure longevity in run times.

Flushby Units can easily long stroke the pump to aid in returning the well to proper pumping action, by simply lifting the polish rod without laying down the surface hydraulic unit. With the use of a Scope Flush Joint and polish rod, zones can now be tested with Scope's Flushby Unit or a conventional hydraulic unit.